| Specifications︰ | Rated heat input: 16KW, 20KW, 32KW, 40KW, 48KW, 56KW
Gas type: LPG/ natural gas
Capacity：8L, 10L, 16L, 20 L, 24L, 28L/min
Input pressure：2800Pa/2000Pa
Thermal efficiency：≥92%
Electronic pulse ignition
Forced exhaust type
Exhaust pipe size:φ50mm
Electric motor：220V/50Hz
Exhaust smoke pipe length: ≤3m
90°elbow: ≤2 pcs
Applicable water pressure: 0.015 – 0.5 MPa
Connection pipe: LPG (inner diameter) φ9.5mm plastic tub to endure oil
Gas pipe: NG, town gas (inner diameter): φ12-15mm
Cold water pipe: G1/2”
Hot water pipe: G1/2”
Rated electricity power: 75 W |
| Advantages︰ | Micro computer control
Remote or wire control for choice |
|
|
Microcomputer controls the constant temperature. The temperature ranges within 32-80.
Full automatic digital display controls;
High efficient and energy saving combustion system;
Intelligent alarm system
The low-noise high-speed blower fan is used to discharge the smoke to the outside and take in the outdoor air for combustion.
Adequate combustion to save energy:
Low water pressure startup（≥0.015MPa）;
LCD digital display of water temperature
Pilot safety device: in case of accidental shut off of water heater, sensing device will automatically cut off gas supply;
Draft switch protection device: in case of blocked flue or too high wind pressure, gas supply will be automatically cut off to avoid influence on normal operation of water heater due to unpunctual exhaust of waste gas;
Overheating protection： when outgoing water temperature is overrun 90 degrees centigrade, gas supply will be automatically cut off. The pre-cleaning program can be used to clear off all the waste gas to prevent outburst. The post-cleaning program may be used to exhaust all the remaining heat and waste gas to ensure security
Ignition delay device: avoid outburst upon ignition;
Electric leakage protection： the electric leakage switch will prevent leakage and ensure safety.
|
|
|
|
|
